The accuracy of extremely low frequency (ELF) magnetic field measurements can be sensitively varied by the meter probe size when the spatial distribution of the magnetic flux density is highly non-uniform, e.g. if the measurement point is close to the field source. The deviation between measured and actual field varies from point to point depending on the probe dimension and on the source configuration, once the other measurement conditions are fixed. The analysis of this effect is developed through a two-dimensional numerical model that enables the evaluation of the actual field value and of the corresponding probe indication. The error distribution, i.e. the deviation between actual and measured value, is computed for magnetic fields generated by industrial three-phase systems under both balanced and unbalanced supply conditions. The analysis shows how, for a given source, the error depends not simply on the distance from the source in relation to the probe size, but on its spatial distribution, which is complex and cannot be a priori predicted without using a computational tool such as the one proposed.

Influence of probe size on the measurement accuracy of non-uniform ELF magnetic fields / Bottauscio, Oriano; Chiampi, M; Crotti, Gabriella; Zucca, Mauro. - In: RADIATION PROTECTION DOSIMETRY. - ISSN 0144-8420. - 111, no. 4:(2004), pp. 369-372. [10.1093/rpd/nch056]

Influence of probe size on the measurement accuracy of non-uniform ELF magnetic fields

BOTTAUSCIO, ORIANO;CROTTI, GABRIELLA;ZUCCA, MAURO
2004

Abstract

The accuracy of extremely low frequency (ELF) magnetic field measurements can be sensitively varied by the meter probe size when the spatial distribution of the magnetic flux density is highly non-uniform, e.g. if the measurement point is close to the field source. The deviation between measured and actual field varies from point to point depending on the probe dimension and on the source configuration, once the other measurement conditions are fixed. The analysis of this effect is developed through a two-dimensional numerical model that enables the evaluation of the actual field value and of the corresponding probe indication. The error distribution, i.e. the deviation between actual and measured value, is computed for magnetic fields generated by industrial three-phase systems under both balanced and unbalanced supply conditions. The analysis shows how, for a given source, the error depends not simply on the distance from the source in relation to the probe size, but on its spatial distribution, which is complex and cannot be a priori predicted without using a computational tool such as the one proposed.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11696/31145
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact