Accurate heat flux measurements are needed to gain a better knowledge of the thermal performance of buildings and to evaluate the heat exchange among various parts of a building envelope. Heat flux meters (HFMs) are commonly used both in laboratory applications and in situ for measuring one-dimensional heat fluxes and, thus, estimating the thermal transmittance of material samples and existing buildings components. Building applications often requires heat flux measurements below 100 W center dot m(-2). However, a standard reference system generating such a low heat flux is available only in a few national metrology institutes (NMIs). In this work, a numerical study aimed at designing an HFM calibration apparatus operating in the heat flux range from 5 W center dot m(-2) to 100 W center dot m(-2) is presented. Predictions about the metrological performance of such a calibration system were estimated by numerical modeling exploiting a commercial FEM code (COMSOL(A (R))). On the basis of the modeling results, an engineered design of such an apparatus was developed and discussed in detail. The system was designed for two different purposes: (i) for measuring the thermal conductivity of insulators and (ii) for calibrating an HFM with an absolute method (i.e., by measuring the applied power from the heater and its active cross section) or by a relative method (i.e., by measuring the temperature drop across a reference material of known thickness and thermal conductivity). The numerical investigations show that in order to minimize the uncertainty of the generated heat flux, a fine temperature control on the thermal guard is needed. The predicted standard uncertainty is within 2% at 10W center dot m(-2) and within 0.5% at 100 W center dot m(-2).

Design of a Calibration System for Heat Flux Meters / Arpino, F; Dell'Isola, M; Ficco, G; Iacomini, L; Fernicola, Vito. - In: INTERNATIONAL JOURNAL OF THERMOPHYSICS. - ISSN 0195-928X. - 32:11-12(2011), pp. 2727-2734. [10.1007/s10765-011-1054-3]

Design of a Calibration System for Heat Flux Meters

IACOMINI L;FERNICOLA, VITO
2011

Abstract

Accurate heat flux measurements are needed to gain a better knowledge of the thermal performance of buildings and to evaluate the heat exchange among various parts of a building envelope. Heat flux meters (HFMs) are commonly used both in laboratory applications and in situ for measuring one-dimensional heat fluxes and, thus, estimating the thermal transmittance of material samples and existing buildings components. Building applications often requires heat flux measurements below 100 W center dot m(-2). However, a standard reference system generating such a low heat flux is available only in a few national metrology institutes (NMIs). In this work, a numerical study aimed at designing an HFM calibration apparatus operating in the heat flux range from 5 W center dot m(-2) to 100 W center dot m(-2) is presented. Predictions about the metrological performance of such a calibration system were estimated by numerical modeling exploiting a commercial FEM code (COMSOL(A (R))). On the basis of the modeling results, an engineered design of such an apparatus was developed and discussed in detail. The system was designed for two different purposes: (i) for measuring the thermal conductivity of insulators and (ii) for calibrating an HFM with an absolute method (i.e., by measuring the applied power from the heater and its active cross section) or by a relative method (i.e., by measuring the temperature drop across a reference material of known thickness and thermal conductivity). The numerical investigations show that in order to minimize the uncertainty of the generated heat flux, a fine temperature control on the thermal guard is needed. The predicted standard uncertainty is within 2% at 10W center dot m(-2) and within 0.5% at 100 W center dot m(-2).
File in questo prodotto:
File Dimensione Formato  
Arpino_Dellisola_Ficco_Iacomini_FernIcola_Calibration_HFM_IJOT_3y_2011.pdf

non disponibili

Licenza: Non Pubblico - Accesso privato/ristretto
Dimensione 393.06 kB
Formato Adobe PDF
393.06 kB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11696/34507
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 9
  • ???jsp.display-item.citation.isi??? 8
social impact