The microstructural and magnetic properties of pure iron ingots used as cores of cyclotron electromagnets have been investigated upon annealing sequence from 650 degrees C to 820 degrees C. Optical Microscopy, Scanning Electron Microscopy, and X-ray Diffraction were employed in the structural analysis, while magnetization curve and hysteresis loops were obtained in rod and ring samples, machined out of the large (around 4 m diameter) cast yoke, by combination of point-by-point and continuous (frequency f = 0.03 Hz) hysteresisgraph methods. Quite inhomogeneous grain structure was observed, with large and irregularly shaped grains (size of several mm), posing special constraints to the conventional magnetic testing approach (e.g., the IEC 60404-4 standard). Reproducible DC magnetic measurements could be performed using large cross-sectional area samples and suitable spatial averaging of the measured effective magnetic field, the eddy current effects being minimized at the same time. Full magnetic softening was obtained upon the annealing sequence in the absence of grain growth and change of distribution and morphology of the inclusions. The measured increase of permeability and decrease of coercivity are therefore entirely ascribed to the relief of the residual stresses, affecting the as-prepared and preliminarily annealed massive (similar to 80 x 10(3) kg) yoke. By recognizing in this way the role of stresses, we are eventually able to estimate the additional contributions to the material coercivity provided by the grain boundaries and the precipitated impurities, the latter playing a major role.

Microstructure and magnetic properties of pure iron for cyclotron electromagnets / Ferrara, Enzo; Olivetti, ELENA SONIA; Fiorillo, F; Forton, E; Martino, L; Rocchino, L.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - 615:(2014), pp. S291-S295. [10.1016/j.jallcom.2014.01.217]

Microstructure and magnetic properties of pure iron for cyclotron electromagnets

FERRARA, ENZO;OLIVETTI, ELENA SONIA;
2014

Abstract

The microstructural and magnetic properties of pure iron ingots used as cores of cyclotron electromagnets have been investigated upon annealing sequence from 650 degrees C to 820 degrees C. Optical Microscopy, Scanning Electron Microscopy, and X-ray Diffraction were employed in the structural analysis, while magnetization curve and hysteresis loops were obtained in rod and ring samples, machined out of the large (around 4 m diameter) cast yoke, by combination of point-by-point and continuous (frequency f = 0.03 Hz) hysteresisgraph methods. Quite inhomogeneous grain structure was observed, with large and irregularly shaped grains (size of several mm), posing special constraints to the conventional magnetic testing approach (e.g., the IEC 60404-4 standard). Reproducible DC magnetic measurements could be performed using large cross-sectional area samples and suitable spatial averaging of the measured effective magnetic field, the eddy current effects being minimized at the same time. Full magnetic softening was obtained upon the annealing sequence in the absence of grain growth and change of distribution and morphology of the inclusions. The measured increase of permeability and decrease of coercivity are therefore entirely ascribed to the relief of the residual stresses, affecting the as-prepared and preliminarily annealed massive (similar to 80 x 10(3) kg) yoke. By recognizing in this way the role of stresses, we are eventually able to estimate the additional contributions to the material coercivity provided by the grain boundaries and the precipitated impurities, the latter playing a major role.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11696/29653
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 14
  • ???jsp.display-item.citation.isi??? 13
social impact